•Calibration equipment
•Alarm lights
•Alarm horns

TEMPERATURE CALIBRATOR
TYPE OTE-T700

OMICRON portable temperature calibrator for testing of temperature- sensors, indicators, switches and safety equipment. The heating medium is hot air. This makes it clean to use and it has quick temperature change response. Temperature range is about 10 degrees above ambient to + 700 degrees Celsius with digital readout of the measured temperature. The calibrator is type approved by DnV

Technical specifications:
• Measuring range : ~30 - 700º C
• Heating medium : Air
• Display : 15 mm 3,5 Digit LCD.
• Dimensions : 410 x 140 x 160 mm.
• Weight : 4 kg
• Power : 120V - 50/60 Hz - 2700W, 230V - 50/60 Hz - 2300W
• Accuracy Up to 100º C : +/- 1º C, 101-400º C: +/- 1 % FS, 401-700º C: +/- 2 % FS
 
PRESSURE CALIBRATOR
TYPE OTE-P202

OMICRON portable pressure  calibrator for testing of pressuresensors, indicators, switches and safety equipment. The pressure medium is oil. It has fine adjustment of the pressure, and an overpressure relief valve. The digital readout can be selected to bar or PSI. Pressure range is 0 - 200 bar / 0 - 1999 PSI.
Technical specifications:
• Measuring range : 0-200 Bar / 0-1999 PSI
• Pressure medium : Oil
• Display : 15 mm 3,5 Digit LCD.
• Dimensions : 310 x 115 x 135 mm.
• Weight : 5 kg
• Hose length : 1,5 m with quick connector and 40 mm testcock
• Power : 1 pc. 9V battery
• Accuracy 0-10 Bar : +/- 0.2 Bar
11-200 Bar : +/- 0.25 % F.s.
LOW PRESSURE/VACUUM
TYPE LTP 1

OMICRON portable low pressure calibrator for testing of pressure- sensors, indicators, switches and safety equipment at a low pressure range.The calibrator can be delivered with either analogue or digital gauges. Kindly specify what type upon request and and ordering.
Technical specifications:
Output pressure : 0-2 Bar / 0-30 PSI
• Output Vacuum : 0-(-850) mBar / 0-(-24)in Hg
• Material : Nickel plated brass/aluminium.
• Adjustments : Fine volumetric press/vacum adj.
• Dimensions : 150 mm(MIN.) x 46 mm DIA.
Digital gauge specifications:
• Range : 0- +/- 500 mBar
• Resolution : 0,1 digit
• Accuracy : 0,25 % FS
• Max press. : 2000 mBar.
• Power : 9 V MN 1604 (PP3) battery.
MEDIUM PRESSURE/VACUUM
TYPE TP 1

OMICRON portable low pressure calibrator for testing of pressure- sensors, indicators, switches and safety equipment at a low to medium pressure range.The calibrator can be delivered with either
analogue or digital gauges. Kindly specify what type and range upon request and and ordering.
Technical specifications:
• Output pressure : 0-20 Bar (Adjustable)
• Output Vacuum : 0-(-800) mBar / 0-(-24)in Hg
• Material : Nickel plated brass/aluminium.
• Adjustments : Fine volumetric press/vacum adj.
• Dimensions : 220(L)x105(W)x63(D) mm
Digital gauge specifications:
• Range : 0- +/- 500 mBar
• Resolution : 0,1 digit
• Accuracy : 0,25 % FS
• Max press. :7000 mBar.
• Power : 9 V MN 1604 (PP3) battery.

ALARM LIGHT
TYPE OAL-A2

OMICRON Alarm Light OAL -A2 is an alarm light designed for harsh outdoor mounting. The housing is of welded stainless steel. The lens is of polycarbonate and has an O-ring gasket to the housing. The electronic card is completely encapsulated in silicone rubber for moisture and vibration protection. The lower part of the housing functions as a junction box for cable connection.
This construction is especially suitable for marine applications.
Technical specifications:
• Type : OAL-2
• Flash energy : 15 Joule
• Voltage : 12-24 V DC
• Current cons. : 1,8 A peak
• Flash rate : 40 per minute
• Weight : 2,0 kg
• Max. height : 235 mm
• Width : 75 mm plus cable gland
• Cable gland rate : IP 68
• Lens colours : clear, amber, green, red and blue
EEx ALARM LIGHT
TYPE XB-11

Alarm Light XB-11 is an alarm light designed for use in potentially explosive atmospheres and harsh environmental conditions. The housing is of UV stable glass reinforced polyester. This light is approved for connection (Eex approved connection) directly in hasardious area.
Technical specifications:
• Type : XB-11
• Flash energy : 5 Joule
• Voltage : 24 V DC 8 W
• Current cons. : 0,32 A
• Weight : 2,5 kg
• Max. height : 178 mm
• Cable gland rate : IP 66/67
• Approvals : EExd IIB T5/99ATX 2195 X.
• Lens colours : amber, green, red, blue and yellow
EEx ALARM LIGHT
TYPE XB-9

Alarm Light XB-9 is an alarm light designed for use in potentially explosive atmospheres and harsh environmental conditions. The housing is of UV stable glass reinforced polyester.
Technical specifications:
• Type : XB-9
• Flash energy : 5 Joule
• Voltage : 24 V DC/230V AC
• Current cons. : 0,32 A (24V)0,06 A(230V)peak
• Flash rate : 60 per minute
• Weight : 1,6 kg
• Max. height : 235 mm
• Width : 75 mm plus cable gland
• Cable gland rate : IP 66/67
• Approvals : EExd IIC T6/BASEEFA cert.
• Lens colours : clear, amber, green, red and blue
EEx ALARM HORN
TYPE DB-3

Alarm horn DB-3 is an electrical alarm horn designed for use in potentially explosive atmospheres and harsh environmental conditions. The housing is of reinforced polyester. Mounting bracket is included
Technical specifications:
• Sound Frequency: 400-3100HZ
• Sound Level : 99-113 db(A)
• Voltage : 11-24 V DC/230V AC
• Current cons. : 0,4 A (24V)0,1 A(230V)
• Colour : Black
• Weight : 4 kg
• Cable gland rate : IP 67
• Approvals : EExd IIC T4/BASEEFA cert.
ALARM HORN
TYPE KT 75/400


Alarm horn KT 75/400 is an air driven alarm horn designed for use in potentially explosive atmospheres and harsh environmental conditions. The horn is delivered with mounting bracket, soleniod valve and air filter. The solenoid valve is non-EEx and must be mounted indoor, safe area

Technical specifications:
• Type: KT 75/400
• Sound Frequency: 400HZ
• Sound Level : 136 db(A) at 1 m adjustable
• Air consumption : 2-5 L/blast/second
• Working pressure: 0,5-1,2 MPa (overpressure)
• Solenoid voltage : 24 V DC
• Current cons. : 340 mA /8 W (24V)
• Cable gland rate : IP 65